JE-LIYCY 8X2X0.5, industrial electronic cable cut

Energy cable < 1 kV, for mobile use

Use: for the transmission of signals and measured values in control and control systems and in the information processing and power electronics for fixed installation in and outside of the rooms according to the VDE 0815 guidelines: in accordance with DIN VDE 0815, multi-wire blender Cu-conductor, insulation case of thermoplastic PVC; Aders to pairs (2 DA = star-four-sewn, 4-pair bundles) Tie of tinned copper wires, bundles in layer outer coat Material: PVCouter coat Color: grey Ader marking: The veins of the pairs are marked by the basic colours of the insulating shell, which are repeated in each bundle in the same sequence. Basic color of the couples: couple 1: blue / red, couple 2: grey / yellow, couple 3: green / brown, couple 4: white / black The bundles are marked by the colors of the rings on the anterior shell and the arrangement of the color in groups. The ring groups are about 60 mm apart. For cables with more than 12 bundles, the 13th and the following bundles are given in colour. When counting, you start in the innermost layer. Electrical data at 20 ° C: operating voltage max. 225 volts, conductor resistance of the loop? 78.4? / km, isolation resistance? 100 M? x kmoperating capacity at 800 Hz? 100 nF / km, capacitive coupling at 800Hz? 200 pF / 100 mTest voltage at 50 Hz, 1 min.: Ader / Ader 500 V Ader / screen 2000 V (For cables up to 4 DA the values may be exceeded by 20%; 20% of the values, but at least one value, may be up to 400pF) temperature range: resting - 5 ° C to + 70 ° C, moving: -5 ° C to + 70 ° Cminimum bending radius: with fixed installation 5 x cable diameter base €100, - / 100 kg metal number (copper): 14.000 per 100 meterThe metal number is a purely commercial calculation size and may differ from the actual metal weight, although usually in kg / km.