0030929, UNITRONIC ® FD CP (TP) plus 3X2X0.34

Towing chain use - in the case of horizontal installation procedures up to 100 m, use in measuring, control and control circuits, linear robots, handling machines, suitable for torsion applications typical in the loop of wind turbines (WKA), When used in towing chains: Please note the mounting line table T3, the high temperature range for use in climate harsh ambient conditions, In the USA inside industrial machinery, lt. NFPA 79, 2015 Ed., 12.9.2 (exception 3 under 12.9.2: to 1 mm ² and < 16 AWG), the decoupling of circuits by means of TP (over- and interfacing effects), the UL- AWM nominal voltage in the case of internal, protected wiring, allows internal installation in addition to the connection lines with the applied UL- rated voltage 1kV, fine-wire (CMU 444) in accordance with the CSA CULL 444, the special copper-wire (PULL), with the special-wire (PU-type), with the special-type polygraph (PULL-type). 214, certified by UL (UL file no. of U.I. Lapp GmbH: E236660), cULus AWM / Recognified certification (by UL / UL file no. of U.I. Lapp GmbH: E63634): UL AWM Style 21576 according to UL 758 and AFM A / B I / II according to CSA C22.2 No. 210-11, designed for 10 million alternating cycles and horizontal paths up to 100 meters, halogen-free, low-capacity and cold-flexible up to -40 ° C, low-adhesion surface, hydrolysis and microbial resistant, oil-resistant, flame-resistant: IEC 60332-1-2, VW-1 according to UL 1581, FT2 (Horizontal Flame Test), PUR-outer coat, cut-resistant and notch, resistant to mineral oils and abrasion in the towing chain,