53533, HELUKABEL heat-resistant line HELUTHERM ® 145 MULTI 4G35 mm ² Black

Energy cable < 1 kV, for mobile use

Technical data: Temperature-resistant and halogen-free connection and control line temperature range moving -35 ° C to + 120 ° C not moving -55 ° C to + 145 ° C in the short circuit case + 250 ° C nominal voltage up to 1 mm ² U0 / U 300 / 500 V from 1.5 mm ² U0 / U 450 / 750 V with fixed and protected installation from 1.5 mm ² U0 / U 600 / 1000 V test voltage in the short circuit case of a minimum bending radius of up to 1 mm ² U0 / U 300 / 500 V, from 1.5 mm ² U0 / U 450 / 750 V, with a high level of protection of temperature range of up to + 120 ° C. GN-GE veins with optimal impact lengths in layers sealant nonwovens outer coat: connected polyolefin copolymer coat colour: black with metal marking properties: reduced fire resistance good abrasion and notch resistance good weather resistance resistant to UV rays and ozone resistant to fusion, even when contact with a soldering flask from 300 ° C to 380 ° C The materials used in the production are silicone and cadmium-free and free of varnishing agents testing: fire test according to DIN VDE 0482-332-3-22, DIN EN 60332-3-22, IEC 60332-3-22, BS 4066, Part 3 fire test according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2-2 halogen-free according to DIN VDE 6332-3- 3- 22, IEC 60332-32- 74- 4- 4- 1, DIN 60772EN, DIN 6072- 64- 62EN, ISO 64- 64- 62EN, ISO 64- 64- 62EN, ISO 64- 62EN, 62L 62EN, 64- 62EN, 62L 62EN, 62EN, 62L 62EN, 62EN, 62EN, 62L 62EN, 62EN, 62EN, 62EN, 62EN, 62EN, 6These connected and temperature-resistant connection and control lines with improved behaviour in the case of fire are used for the connection of lamps, heat equipment, electrical machines, switching systems and distributors. The excellent temperature resistance also results in a very long service life. These lines have good weather resistance, such as temperature, humidity, ozone and UV resistance, and are mainly used for transport systems or in the outdoor area. In the case of the combustion of these halogen-free lines, there is little smoke development, no corrosive gases are produced and the low fire load significantly reduces the risk of toxic fire gases. This will reduce fire damage to control and monitoring systems and the concrete and steel structure of buildings and plants. The high temperature load may reduce the cross-section of the circuit and thus save space and weight. These connection and control lines make a significant contribution to safety and the environment. Control length: 500 m, 1000 m Technical changes reserved. Metal number (copper): 134.400 per 100 meterThe metal number is a purely commercial calculation size and may differ from the actual metal weight, although usually specified in kg / km.