22561, HELUKABEL PUR-Trawling Line MULTIFLEX 512 ® -PUR 5G10 mm ² Grey

Energy cable < 1 kV, for mobile use

Technical data: Special towing chain line for extreme mechanical loads based on DIN VDE 0285-525-2-21 / DIN EN 50525-2-21 temperature range -30 ° C to + 80 ° C not moving -40 ° C to + 80 ° C nominal voltage U0 / U 300 / 500 V test voltage 3000 V isolation resistance min. 100 MOhm x km minimum bending radius moves 5x line Ø not moving 3x line Ø alternating bending test tested with approx. 10 million AC-bending cycles radiation resistance up to 50x106 cJ / kg (up to 50 mrad) structure: Cu-Litze blank, fine-wire according to DIN VDE 0295 Kl.6, Sp.4, BS 6360 cl.6 and IEC 60228 cl.6 Ader insulation from special PP Ader marking black veins with continuous white diaphragm pressure of the veins in layers sewn, with optimally adjusted impact lengths special protection handling over each seiling position (from 4 mm ² without protective handling over the outer position) outer coat of special - full polyurethane TMPU, according to DIN VDE 0207- 36-10-2 / DIN EN 50363- 10- 2-almond color (RAL 7001), with very high resistance to high resistance to high resistance to the resistance of the surface, high resistance to high resistance to the pressure of the air, high resistance to high resistance to the resistance of the surface, high resistance to the high resistance to the pressure of the surface. The materials used in the production are silicon and cadmium free and free of lacquer-wetting substances. These special towing chain lines are used for continuous flexible loads in machine and tool construction, in robot technology and on permanently moving machine parts, for continuous use in multi-layer operation. In the case of free movement without tensile stress and without forced movement, proven convincingly in the towing chain use. It is a highly flexible control line, developed according to the latest state of the art, with a sliding PP- aderisolation and a cut-off and low-adhesion PUR outer coat that guarantees an optimal at life and a very high cost. For applications that go beyond standard solutions (e.g. for composting or high-shelf conveying systems with extremely high process speed, etc.), we recommend you to use our survey sheet for energy management systems in the lead. For use in energy guide chains, please note assembly instructions. Control length: 500 m, 1000 m Technical changes reserved. Number of metals (copper): 48.000 per 100 meterThe number of metals is a purely commercial calculation and may differ from the actual weight of the metal, although usually expressed in kg / km in industry.