46702, SiD 1x2.5 mm ² RT

Lead

Technical data: Special silicone single-wheel with increased heat resistance based on DIN VDE 0250 part 1 and part 502 temperature range -60 ° C to + 180 ° C (short + 220 ° C) limit temperature at the conductor in operation + 180 ° C nominal voltage U0 / U 300 / 500 V test voltage 2000 V flow voltage min. 5000 V minimum bending radius 15x Ader Ø (SiD only for fixed laying) radiation resistance up to 20 x 106 cJ / kg (up to 20 Mrad) structure: type SiF / GL cu- lite plated, from 0.5 mm ² according to DIN VDE 0295 Kl.5, fine-grained, BS 6360 cl.5, IEC 60228 cl.5 ladders at: type SiF / GL cu- lite, from 0.5 mm ², from type VDE 0295 Kl.5, high-grated, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, low-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high-level, high Otherwise, the mechanical properties of silicone are reduced when the air is closed in combination with temperatures above 90 ° C. Tests of corrosion of fire gases (halogen-free) according to DIN VDE 0482 Part 267, DIN EN 50267-2-2, IEC 60754-2 (corresponds to DIN VDE 0472 Part 813) burning behaviour no fire transmission according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 (corresponds to DIN VDE 0472 Part 804 test type B). Especially used in steel, steel and rolling mills, foundries, aircraft and shipbuilding, cement, glass and ceramic factories. They are halogen-free and are particularly suitable for use in power plants. Control lengths: 100 m Technical changes reserved.