16363, HELUKABEL PVC control line F-CY-JZ 32G0.75 mm ² grey

Energy cable < 1 kV, for mobile use

Technical data: Special PVC hose line based on DIN VDE 0285-525-2-51 / DIN EN 50525-2-51 temperature range moving -10 ° C to + 80 ° C not moving -40 ° C to + 80 ° C nominal voltage U0 / U 300 / 500 V test voltage Ader / Ader 4000 V Ader / Screen 2000 V flow voltage min. 8000 V insulation resistance min. 20 MOhm x km operating capacity different from 0.5 to 2.5 mm ² depending on the cross-section: Ader / Ader approx. 150 nF / km Ader / screen approx. 270 nF / km coupling resistance max. 250 Ohm / km minimum bending radius moves 10x line Ø not moving 5x line Ø radiation resistance up to 80x106 cJ / kg (up to 80 Mrad) structure: Cu-Litze blank, according to DIN VDE 0295 Kl.5, enemy-wire, BS 6360 cl.5, IEC 60228 cl.5 Aderization from special -PVC Aderization from special -PVC Ader marking according to DIN VDE 0293 black veins with continuous white dial print, veins with optimal impact lengths in layers of silkered, approx. 85% special PVC mantle coat: grey (RAL 7001) with metal marking properties: wide oil resistant, oil / chemical resistance The materials used in the production are silicon- and cadmium-free and free of lacquer-wetting substances testing: PVC self-extinguishing and flame-resistant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2 (corresponds to DIN VDE 0472 Part 804 test type B). In the case of medium mechanical stress for flexible application with free movement without tensile stress and without forced movement in dry, wet and wet rooms, but not outdoors, as a control line in control and control technology, in tool and mechanical engineering, in computing systems, in heating and air conditioning, in plant construction and as a signal line in electronics. Instead of a complex PVC inner coat, a stabilizing film is used between the body and the fencing. It significantly reduces the external diameter, which means lower bending adiums, lower weight, etc. Due to the high shielding density, an undisturbed transmission of signals or Impulse ensured. The ideal fault-protected control line for above use. EMC = Electromagnetic compatibility In order to optimize the EMC properties, we recommend a two-sided and large-scale round contact of the copper mesh. Control length: 500 m, 1000 mTechnical changes reserved. Metal number (copper): 34.200 per 100 meterThe metal number is a purely commercial calculation size and may differ from the actual metal weight, although usually specified in kg / km.