28233, H07V-R drum 1x240 mm ² SW

Lead

Technical data: PVC single-wheel according to DIN VDE 0285-525-2-31 / DIN EN 50525-2-31 and IEC 60227-3 temperature range -5 ° C to + 70 ° C not moving -30 ° C to + 80 ° C nominal voltage U0 / U 450 / 750 V test voltage 2500 V isolation resistance min. 10 MOhm x km minimum bending radius fixed Ader Ø = 8 mm: 4x Ader Ø 8-12 mm: 5x Ader Ø Ader Ø > 12 mm: 6x Ader Ø Radiation resistance up to 80x106 cJ / kg (up to 80 Mrad) Structure: Cu-Litze blank, according to DIN VDE 0295 Kl.5, fine-dash, BS 6360 cl.5, IEC 60228 cl.5 Aderolation from PVC mixing type TI1 according to DIN VDE 20736-3DIN -336EN -3003 The materials used in the production are silicone and cadmium-free and free of lacquered wetting substances testing PVC self-extinguishing and flame-resistant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-2 (corresponds to DIN VDE 0472 Part 804 test type B) use: use for the installation also in tubes, in and under plaster and in closed installation channels. May not be used for direct transfer to pritches, rines or tubs. Approved for internal wiring of devices, distributors and switching systems and for protected installation in and on lamps with a nominal voltage of up to 1000 V AC or a DC voltage of up to 750 V against earth. Control length: 500 m, 1000 m Technical changes reserved. Metal number (copper): 230,400 per 100 meterThe metal number is a purely commercial calculation size and may differ from the actual metal weight, although usually specified in kg / km.