705413, HELUKABEL motor, servo and donor line UL / CSA TOPGEBER 512 PUR (3x2x0.25 + 2x0.5) mm ² green

Energy cable < 1 kV, for mobile use

Technical data: Special-PUR-Trawling line according to UL AWM Style 20233 and 20236 and CSA temperature range moves -30 ° C to + 80 ° C not moving -40 ° C to + 80 ° C nominal voltage according to Siemens 30 V according to Bosch Rexroth and Lenze 300 V further details on request test voltage, 50 Hz Ader / Ader 2000 V Ader / Screen 1000 V operating capacity at 800 Hz Ader / Ader approx. 70 nF / km Ader / screen approx. 110 nF / km isolation resistance min. 20 MOhm x km coupling resistance max. 250 Ohm minimum bending radius moves 10x line Ø does not move 6x line Ø construction: Cu-Litze is tinned, according to DIN VDE 0295 Kl.6, fine-wire, BS 6360 cl.6, IEC 60228 cl.6 Aderization of special-polypropylene anterior colors on request, supporting nonwovens, complete shielding with inert side flashes and inert cufencing, approx. 85% cover polyester outer coat of PUR mantle colour: green, with support of the non-glands, extremely high-resistance to the surface of the skin, 60% of the skin. These lines are manufactured according to high quality guidelines and comply with the DESINA ® standard due to the high-quality special aderization, the PUR coat and the highly flexible set-up, these lines are perfectly suitable for the towing chain use and offer high functional safety due to the 85% dense shielding device optimal compliance with electromagnetic compatibility requirements (EMC) With the UL / CSA application especially interesting for the export-oriented market The materials used in the production are silicone and cadmium-free and free from paint-retardant substances cleaning and disinfectant-resistant according to ECOLAB use: These low-capacity incrementals or position-reporting lines pass on control impulses for the positioning and process characteristics of servo motors and are used as connecting lines for tacho, brakes and impulse devices in high mechanical loads in plant, mechanical engineering, as well as in control and automation technology. For use in energy supply chains, please observe the set-up guidelines. EMC = Electromagnetic compatibility In order to optimize the EMC properties, we recommend a two-sided and large-scale round contact of the copper mesh. Control lengths: 100 m, 500 m, 1000 m Technical changes reserved.