49836, HELUKABEL PUR Trawl Line UL / CSA SUPER-PAAR-TRONIC 340-C-PUR 8x2x0.25 mm ² (24 AWG) Grey

Energy cable < 1 kV, for mobile use

Technical data: Special towing chain line, paired, moved according to UL Style 20233 temperature range -30 ° C to + 80 ° C not moving -40 ° C to + 80 ° C nominal voltage 300 V test voltage Ader / Ader 1500 V Ader / screen 1000 V operating capacity Ader / Ader approx. 60 nF / km minimum bending radius moves 0.14 - 0.25 mm ²: 7.5x line Ø 0.34 - 1 mm ²: 10x line Ø not moving 0.14 - 0.25 mm ²: 4x line Ø 0.34 - 1 mm ²: 5x line Ø coupling resistance max. 250 Ohm / km radiation resistance up to 100x106 cJ / kg (up to 100 Mrad) structure: Cu-Litze blank, fine-wire, according to DIN VDE 0295 Kl.6, BS 6360 Kl.6 and IEC 60228 Kl.6 Aderization from PP Adermarking to DIN 47100 Aders for pairs, pairs in layers with optimal impact lengths of torsion-free sewn film processing shielding from cu- woven, tinned, covering approx. 85% non-woven outer coat of full polyurethane mixing type TMPU according to DIN VDE 0207-363-10-2 / DIN EN 50363-10-2 and gem. UL Std.1581 tab.50.227 Mantel colour: grey (RAL 7001) with metal marking properties: The materials used in the production are silicone and cadmium-free and free of lacquer-disrupting substances halogen-free weather, ozone and UV-resistant chemical resistance to solvents, acids, alkali and hydraulic fluids tests: PUR-outer coat flame-resistant according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1-1-2 oil-resistance according to DIN VDE 047- 811-404 / DIN EN 60811-404, low-strength and low-resistance: These pair-sewn, total-shielded special-chain lines also offer applications where external high-frequency influences interfere with the transmission of the pulse and are used for continuous flexible stress in machine and tool construction, robot technology and permanently moving machine parts, for continuous use in multi-layer operation. It is a highly flexible data line, developed according to the latest state of the art, with a cut-off and low-adhesion PUR outer coat that guarantees an optimal at life and a very high cost. This two-standard line is preferably used in export-oriented mechanical engineering on machine tools, production lines and in plant construction. Provides continuous use in multi-layer operation with extremely high bending stress. For applications that go beyond standard solutions, we recommend to you, our specially developed survey sheet for energy management systems, further application parameters see the selection table: lines for energy management chains in the section Technical Information. For use in energy guide chains, please note assembly instructions. EMC = Electromagnetic compatibility In order to optimize the EMC properties, we recommend a two-sided and large-scale round contact of the copper mesh. Control lengths: 100 m, 500 m, 1000 m Technical changes reserved. Metal number (copper): 7,440 per 100 meterThe metal number is a purely commercial calculation size and may differ from the actual metal weight, although usually expressed in kg / km in industry.