23004, HELUKABEL PVC-PUR hose lines SiHF 5G0.75 ROTBRAUN cutting length

Energy cable < 1 kV, for mobile use

Technical data: Special-silicone hose line with increased heat resistance in line with DIN VDE 0250-1 and DIN VDE 0285-525-2-83 / DIN EN 50525-2-83 temperature range -60 ° C to + 180 ° C (short time + 220 ° C) limit temperature on the conductor, in operation + 180 ° C nominal voltage U0 / U 300 / 500 V test voltage 2000 V flow voltage min. 5000 V insulation resistance min. 200 MOhm x km current load at ambient temperature up to + 145 ° C - load capacity 58% 175 ° C - load capacity 41% minimum bending radius moves 7.5x conduction ± 100% 155 ° C - load capacity 91% 160 ° C - load capacity 82% 165 ° C - load capacity 71% 170 ° C - load capacity in accordance with DIN VDE 0100 - minimum bending radius moves 7.5x conductivity Ø not moving 4x conduction Ø radiation resistance up to 20x106 cJ / kg (up to 20 mrad): cu-lite in the case of silica, with a high-colour of a silica. The advantages of little change in the strength of the flow and de-isolation resistance even at higher temperatures, high flame point, in the case of fire, SiO2-isolating resistance to high-molecular oils, vegetable and animal fats, alcohols, plasticizers and clophs, diluted acids, lye and salt solutions, oxidants, tropical and weather influences, sea water, oxygen, ozone, in the case of fixed laying only in open, ventilated pipe systems or channels. Otherwise, the mechanical properties of silicone are reduced when the air is closed in combination with temperatures above 90 ° C. Tests: halogen-free according to DIN VDE 0482 part 267, DIN EN 50267-2-2 / IEC 60754-2 (corresponds to DIN VDE 0472 part 813) burning behaviour no fire transmission according to DIN VDE 0482-332-1-2, DIN EN 60332-1-2, IEC 60332-1 Note: shielded analogue type: SiHF-C-Si use: Silicon lines are used wherever line isolations are exposed to high temperature fluctuations. Due to excellent weather resistance, silicone lines can be used at both high and low temperatures up to -60 ° C. Especially for use in power plants. Also in steel, steel and rolling mills, foundries, in aircraft and shipbuilding, in cement, glass and ceramic factories, in headlamps, high-performance lamps and heat equipment of all kinds. Because of the elastic properties of the aderisolation, they are used as moving connection lines. Control lengths: 100 m, 500 m, 1000 m Technical changes reserved. Metal number (copper): 3.600 per 100 meterThe metal number is a purely commercial calculation size and may differ from the actual metal weight, although usually specified in kg / km.