FAG 202-XL-KRR 1 Row Ball Bearing - 15 mm ID, 35 mm OD

Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent constructionVery good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocksRadial insert ball bearings with a cylindrical outer ring are highly suitable where:A cylindrical housing bore is already presentThe outer ring of the bearings is to be located by means of easy-to-fit snap ringsRadial insert ball bearings with a profiled bore are highly suitable where:Shafts must transmit very high torquesRadial insert ball bearings with a rubber interliner are highly suitable where:Vibrations and shocks must be supportedDamping of running noise is required

Static angular misalignments of the shaft must be compensated, which are caused by mounting inaccuracies and tolerances in the adjacent construction

Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks

Very good seals are required in environmental conditions such as dust, contamination, moisture, stone impacts and shocks

Radial insert ball bearings with a cylindrical outer ring are highly suitable where:

Radial insert ball bearings with a cylindrical outer ring are highly suitable where:

A cylindrical housing bore is already present

A cylindrical housing bore is already present

The outer ring of the bearings is to be located by means of easy-to-fit snap rings

The outer ring of the bearings is to be located by means of easy-to-fit snap rings

Radial insert ball bearings with a profiled bore are highly suitable where:

Radial insert ball bearings with a profiled bore are highly suitable where:

Shafts must transmit very high torques

Shafts must transmit very high torques

Radial insert ball bearings with a rubber interliner are highly suitable where:

Radial insert ball bearings with a rubber interliner are highly suitable where:

Vibrations and shocks must be supported

Vibrations and shocks must be supported

Damping of running noise is required

Damping of running noise is required