FAG 31306-A Taper 30 mm ID Roller Bearing, 72 mm OD

High radial loads occurHigh axial loads act on one sideCombined loads must be supported (radial and axial forces acting simultaneously)Precise axial guidance of the shaft is required (locating bearing function)The bearing arrangement must have very high axial rigidityThe bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)High running accuracy is requiredThe load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not requiredThe bearings are not required to compensate misalignmentsThe design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity

High radial loads occur

High axial loads act on one side

High axial loads act on one side

Combined loads must be supported (radial and axial forces acting simultaneously)

Combined loads must be supported (radial and axial forces acting simultaneously)

Precise axial guidance of the shaft is required (locating bearing function)

Precise axial guidance of the shaft is required (locating bearing function)

The bearing arrangement must have very high axial rigidity

The bearing arrangement must have very high axial rigidity

The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)

The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)

High running accuracy is required

High running accuracy is required

The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required

The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required

The bearings are not required to compensate misalignments

The bearings are not required to compensate misalignments

The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity

The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity