INA SL183011-A-XL 55 mm ID Roller Bearing, 90 mm OD

Bearing arrangements are subjected to particularly high radial loadsNot only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function)Bearing arrangements operating under the conditions described above must have very high rigidityAxial displacements of the shaft relative to the housing must be compensated without constraint in the bearingVery high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage and particularly space-saving designs are required despite very high loadThe bearings should be separable (not self-retaining) for easier mounting

Bearing arrangements are subjected to particularly high radial loads

Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function)

Not only very high radial forces but also high axial loads from one direction must be supported by the bearing position (semi‑locating bearing function)

Bearing arrangements operating under the conditions described above must have very high rigidity

Bearing arrangements operating under the conditions described above must have very high rigidity

Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing

Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing

Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage and particularly space-saving designs are required despite very high load

Very high radial loads occur at lower speeds, i.e. the bearings do not need to achieve speeds as high as those of cylindrical roller bearings with cage and particularly space-saving designs are required despite very high load

The bearings should be separable (not self-retaining) for easier mounting

The bearings should be separable (not self-retaining) for easier mounting