Yoke Cam Follower LR5207-2Z-TVH-XL, 35mm ID, 80mm OD

Ball bearing track rollers: Are ready-to-fit, single or double row rolling bearings based on deep groove or angular contact ball bearingsAre supplied with or without a stud (designs without a stud are mounted on shafts or studs)Have particularly thick-walled outer rings with a crowned or cylindrical outside surfaceCan support high radial loadsTolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impactsAre sealed on both sidesAre also available with a plastic tyre on the outer ring for low-noise runningAre not mounted in a housing bore, but are supported on a flat mating trackCan be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction

Ball bearing track rollers: Are ready-to-fit, single or double row rolling bearings based on deep groove or angular contact ball bearingsAre supplied with or without a stud (designs without a stud are mounted on shafts or studs)Have particularly thick-walled outer rings with a crowned or cylindrical outside surfaceCan support high radial loadsTolerate axial loads which are due to small misalignment defects, skewed running or temporary contact running impactsAre sealed on both sidesAre also available with a plastic tyre on the outer ring for low-noise runningAre not mounted in a housing bore, but are supported on a flat mating trackCan be adjusted to the mating track in the design with the eccentric collar, thus permitting, for example, larger manufacturing tolerances in the adjacent construction