ESR12NP -230V + UC, current-shock switch, 1 closing 16A

Additionally available packaging sizes: 1 / 10 / 100

1 closing non-potential-free 16A / 250V AC, 230V LED lamps up to 600W, filament lamps 2300W, return delay with switch-off warning and button-long light can be switched on. Stand-by loss only 0.5 watts. Line installation device for assembly on DIN-EN 60715 TH35. 1 unit of division = 18mm wide, 58mm deep. Contact in the zero passage for the protection of contacts and lamps. The most modern hybrid technology combines the advantages of wear-free electronic control with the high performance of special relays. Control voltage 230V, additionally with galvanically separate universal control voltage 8.. 230V UC. Supply and switching voltage 230V. Very low switching noise. Precise time setting of the return delay RV in the function ESV from 2 to 120 minutes with a minute scale. With control LED. This flashes after 15 minutes with a blocked button (not in the function ER). At the 230V control input mica flow up to 150mA, independent of the ignition voltage (not in the function ER). In the relay functions suitable for feedback with the switching voltage of a dimming switch. In the event of a failure of the supply voltage is defined off. A rotary switch can be used to set to the functions ES, ER and ESV: ES = current shock switch. ER = control relays. ESV = current shock switch with relapse delay. The current shock switch automatically switches off after the set delay time when the manual output command has not been given. Time range up to 120 minutes adjustable. ESV + switch-off warning = When the switch-off warning is switched on, the switch-off warning is made 30 seconds before the time run by multiple short flashes of the lighting. During this time, you can switch back. ESV + Taster-Durable Light = In the case of the switch-on, this current-impact switch switches to the continuous-light when a control-button is operated for more than 1 second. It can be switched off for more than 2 seconds by means of new keys. If this is forgotten, the permanent light is automatically switched off after 2 hours. ESV + switch-off warning and switch-off light = If the switch-off warning and the switch-off light are switched on, the switch-off warning is only done after the continuous light is switched off. If this current-shock switch is in a circuit that is monitored with a field-free switch FR12-230V, it does not require an additional basic load, but the monitoring voltage of the FR12-230V must be set to max.