VX 5314.175, VX IT compartment rack, ventilated, 2 doors, 2 x 23 HE, BHT: 800x2200x1000 mm

VX IT Composition Rack IT Rack, with 2 self-contained installation compartments, extension height 2x23 HE, steel mounting doors ventilated, front and rear. Frame frame: pre-assembled IT Rack, consisting of a windproof, welded, all-sided symmetrical frame of rolled, 9-fold, closed hollow profiles, with integrated hole in the scale of 25 mm. Frame with integrated blind-riveted nuts M6, protective-type fastening of fittings to the profile. All profile edges rounded. The same profiles with two mounting levels on each profile, accessible from inside and outside, for the space-saving and fast interior design. Profiles with inverse system hole for the use of cage nuts and metric screw-to-thread size M8, in change with a round hole for sheet screws 5,5x13 mm. Readable, loadable up to 10,000 N statisch.Soil: welded, closed floor frame, with pre-assembled, pull-out, two-part, closed floor sheet. Front and back door: front and back 2 x steel sheet door, one-part, ventilated, with 85% free ventilation area. Paint, RAL 7035. Doors reinforced with door frame including integrated hole image in 25 mm scale and hammer head image for cable removal. Each door is double-hinged and has a 2-point locking system. The door attack is interchangeable. Door opening angle 130 ° at single position and 115 ° inincentive. All doors with a comfortable handle for profile semi-cylinder (30 / 10) mm, equipped with a safety closure 3524 E.Dachtsheet: roof plate, one-piece, with two-sided cable introduction overboard bars in the middle of the roof. Mounting planes: front-mounted cabinet with two 482.6 mm (19) mounting levels, front and rear-mounted each compartment, individually adjustable, independently of each other. Mounting planes consisting of universal profiles for server, network and electronic applications, front and rear, deep-variable, in the scale of 12.5 mm, on the left-wall. Air conductive sheets in the 19-mounting profile already integrated. Profiles front and rear, material thickness 2.5 mm, including additional hole image according to standard EIA 310 E.Static load capacity up to 10.000 N according to UL 2416.Scope of delivery: pre-assembled housing including. Assembly instruction and 4 door key potential compensation: All planning parts with automatic potential compensation, or prepared for fixing grounding bands. Front and back doors require additional grounding bands for connection to the frame frame. Potential balance set is available in the accessories. Cable channel: cabinet with integrated, vertical cable channels, both sides. Each cable channel has separate cable guidance areas, according to the number of compartments, which are protected from each other. Each compartment therefore has two secured areas for cable guidance in the channel, to, or from the compartment in each roof and in the floor area of the housing. Dissection walls on the left and right are already pre-assembled in delivery. In principle, no side walls or other partitions are necessary, but can be optionally divided, lockable side walls, or part-screwed side walls, from which VX IT accessories are obtained (e.g. completion of a cabinet series). Intermediate floor: The intermediate floor for the separation of the compartments has a load of 100 N, for the optional recording of the tool, assembly material or documentation during the installation. Material: cabinet frame, roof plate: steel plate 1,5 mm separator between the compartments, steel plate 1.25 mm floor plate: steel plate: steel plate: 1,0 mm front and back door: steel plate, 482,6 mm (19): steel plate surface design (steel sheet): three-fold treatment of the surface of the surface: No RA002X-type and surface-coating: C0020-type: C0020-type: R020 mm