UFK6620, UFK cable box 100x230x270 mm (HxBxT) S90 cable bulkhead three-sided

Additionally available packaging sizes: 10000

UFK cable box "System Wichmann" ® Z-19.15-20. Fire-resistant S90 disclosures of cable transmissions in the system floor area, in the floor or under doors. The three-sided cable box consists of a galvanized steel sheet housing, lined with fire protection agent that is foaming in the case of fire. The fire is functionally separated from the calamity seal and works independently of the seal. The function of the cable box is not interrupted during the post-installation work. The cable closure is supplied as an industrial pre-made and functional and assembly-ready component and is masked or engraved on site. False and overlay are almost excluded due to construction. The UFK cable box can be attached directly to the raw floor via already laid cables, because its base is open. Only one UFK component with the same height may be installed per UFK. The contained EasyFoam foam stoppers are used for calvary sealing. They have a much lower density and are therefore easier and faster to process than for example fire protection stopper. The sealing to the cables and to the housing is carried out with a permanent elastic sealant (e.g. silicone or acrylic) or with the EasyFoam fire protection mounting foam B1. Installation in the system floor area and in light partitions or in massive walls of 100 mm or more. The cable box can be filled 100% with cables of all kinds (without any limitation of the cable diameter) and with electric installation empty tubes according to DIN EN 61386 with and without cable installation up to a diameter of 63 mm. In addition, the sealed cable box can be installed as a reserve sheet without any capacity. At occupancy no distances between cables, cables and empty pipes and empty pipes are necessary. Within the empty tubes there is no additional limitation of the cable types and the cable diameter. The UFK cable box is particularly popular as a lock under fire protection doors in the vicinity of revision openings in the system floor, as it can be replicated without much effort at any time. The assembly is carried out according to the attached assembly instructions or ABG Z-19.5- 2517. No processor certification is necessary for the installation.