Leckstar 101 AC 230 V, electrode relay, supply voltage AC 230 V, mounting on DIN rail 35 mm or mounting over 2 holes

Electrode relays for underground or construction assembly, with DIBT- approval No Z65.40-203with above connection terminals, supply voltage 230 V AC suitable for our conductive leakage electrodes with integrated line breakage monitoring and on-board self-restraint, other supply voltage is happy to request the connection of 1 conductive electrode with line breakage monitoring unit Z10with 1 potential-free changer at the output and with 3 built-in light diodes to report the operating conditions. Self-posture: If the switch for the self-posture is on, a once occurring alarm is stored. The relay continues to report alarm, even if the alarm ground, e.g. For example, the presence of water or line breakage is no longer given, that is, when the sensor is dry again or the line is in contact again. If the switch for self-restraint is not switched on, the alarm is not held after the alarm is dropped, but then disappears. Power consumption approx. 3 VA electrode circuit 2 connections (lead protection small voltage SELV) / response sensitivity approx. 30 kΩ or approx. 33 μS (direct value) / active current circuit 1 single-pole potential-free changer in the rest current principle / switching voltage max. AC 250 V AC 4 A switching power max. 500 VA housing insulation material, 75 x 55 x 110 mm / protection type IP 20 Assembly quick fitting for U-rail according to DIN 46277 and DIN EN 50022 / temperature range − 20 ° C to + 60 ° CDIE GENERAL TECHNICAL DATA TO BE USED FOR THE ANNUAL PRODUCT DESCRIPTION.