082203, essay blinds-ST memory + sensor output. System 55

Set of blinds control buttons with memory function and sensor evaluation in pure white glossy All sets of blinds control buttons have a large-scale operating surface for the hand operation of blinds and roller shutters. Characteristics: - Short key pressure (< 1 s): Creates an impulse according to the duration of the key operation (e.g. for lamellar adjustment). - Long key pressure (> 1 s): Activates the continuous run (self-restraint). - Electronic locking of the control button. - Individual storage capacity of up and down time. - Saving the up or down time is done by the long operation of the respective direction button (approx. 2 s). - The two stored blinds are repeated in the 24-hour rhythm. - use, for example, for presence simulation. - The memory mode can be switched on or off at any time. - Manual operation of the blinds is always possible. - The mode of operation is changed by pressing the direction keys simultaneously. After about 3 s the mode of operation has changed, and a signal tone sounds. - possibility of connection for the blinds control system sun and insulation sensors inside or outside to protect against direct solar radiation. - possibility of connection for the blinds control system glass break sensor for protection in case of glass shock, glass break or break-in. - The sensor line is used by a screw terminal with the control button or Use blinds control connected. Note: - The blinds control buttons are mounted in conjunction with the use of blinds control DC 24 V with remote input, use of blinds control with remote input or use of blinds control without remote input into a device box. (Use of a deep device can recommended.)