SKF HK 1412 14 mm ID Roller Bearing Needle, 20 mm OD

SKF Roller Bearing, Needle, 14mm ID, 20mm OD - HK 1412

Need a small, lightweight roller bearing to support heavy loads? Choose this 14mm needle roller bearing from SKF. It's made using a deep-drawing manufacturing process that leaves no joins on the outer cup, which means it's both watertight and resistant to impact. The cup is made from hardened steel, which is highly durable for use in harsh industrial settings. With a high dynamic load rating of 6.82kN and static load rating of 8.65kN, this bearing is ideal for heavy-duty use.

Need a small, lightweight roller bearing to support heavy loads? Choose this 14mm needle roller bearing from SKF. It's made using a deep-drawing manufacturing process that leaves no joins on the outer cup, which means it's both watertight and resistant to impact. The cup is made from hardened steel, which is highly durable for use in harsh industrial settings. With a high dynamic load rating of 6.82kN and static load rating of 8.65kN, this bearing is ideal for heavy-duty use.

• Cage construction helps stabilise the rollers and enhances lubricant circulation• Tapered roller ends prevent stress peaks, which can cause needles to skew• Lubrication hole in the outer ring makes regreasing easy

• Cage construction helps stabilise the rollers and enhances lubricant circulation

• Tapered roller ends prevent stress peaks, which can cause needles to skew

• Tapered roller ends prevent stress peaks, which can cause needles to skew

• Lubrication hole in the outer ring makes regreasing easy

• Lubrication hole in the outer ring makes regreasing easy

Applications

• Vehicle parts• Agricultural components• Power tools• Construction equipment

• Vehicle parts

• Agricultural components

• Agricultural components

• Power tools

• Power tools

• Construction equipment

• Construction equipment

Can this needle roller bearing be fitted directly to the shaft?

Yes, this bearing is usually fitted directly to the shaft. It can also be combined with an inner ring if needed.

Yes, this bearing is usually fitted directly to the shaft. It can also be combined with an inner ring if needed.

Do I need a snap ring to fit this needle roller bearing to the shaft?

No – because of the tight interference fit in the housing bore, this unit will stay in position without a snap ring.

No – because of the tight interference fit in the housing bore, this unit will stay in position without a snap ring.