VC-337, VOLTCRAFT VC-337 Digital Tensile CAT III 300 V, CAT II 600 V Display (Counts): 4000

VOLTCRAFT VC-337 power tongs digital CAT III 300 V, CAT II 600 V display (rates): 4000AC / DC power tongs VC-337 optimized for working in control cabinets Super narrow tongs mule CAT II 600V, CAT III 300VWith the particularly slender tongs mouth of this power tongs, individual lines between cable shaft and shank can be accessed significantly better. The solution for tight lines in the control cabinet. In between, the specially shaped, narrow zangen mouth makes it much easier to remove closely wired cables in control cabinets. The line to be measured must be pulled out of the cable shaft with conventional shaped pliers. Not like that at the VOLTCRAFT VC-337. It simply passes between adjacent lines. Long hole for more flexible work. The measuring aperture has a duchmeter of 5.5mm. Pipes up to 6mm ² can be taken. The trench offers a very good compromise between the size of the trench and safety class with appropriate insulation. The pliers can also be set to a angle. The form of the opening makes it possible. The open pliers have an attack. For this reason, lines cannot be too deep into the zangenmaul. Robust and hand-made. The 2-component housing with integrated soft rubber protection also has hard applications. The rubberized housing shell also makes the measuring instrument very griffig.Current tongs for interruptionfree current measurement. The advantage of this measurement method is the cutting function, with which current measurements can be performed without the usual switching and disconnection of the circuit. The TrueRMS real-effect measurement allows the exact measurement of unsymmetrical voltages and currents that differ from the basic form of the sinus wave. Unsymmetrical voltages usually occur in power controllers such as dimmers, speed controllers, cut-off control systems, pulsed chargers or electronic control systems in model construction, etc. Conventional mean value measuring instruments show some very large measurement deviation in such special measurement tasks. Reliable measurement results with factory calibration In the framework of quality assurance, a calibration according to work standard is performed for all VOLTCRAFT ® measuring instruments in the production of the measuring instrument. This ensures high quality and compliance with the tolerance limits as indicated in the technical data of the user manual. Technical data: Display (counts): 4000 · Display (digital / mechanical / analog): digital · Weight: 134 g · Basic accuracy (plus / minus): 0.8% · Measurement (details): True RMS · Measurement range A / AC max.: 40 A · Measurement range A / AC min.: 0.001 A · Voltage range: A / DC max.: 40 A · Measurement range: 0.001 A · Measurement range: 0.1 nF - 100 Measurement range: 1 / V