DHZ + 5 (80) A, 3x230 / 400V, MID, M-Bus, DT, B, current meter electronic MID, 0.25-5 (80) A, M-Bus for reference

Rated current meter electronic MID, 0.25-5 (80) A, Mbus for reference

The DHZ + is a digital 2-tariff energy meter for the 4-conductor power grid with M-BUS + 2xS0pulse output for connection for Hutch rail assembly. The DHZ + is a digital 2-tariff counter for measuring positive (reference) energy in 4-circuit networks. Digital current meter for direct measurement, display display for: energy value, display test, pulse constant, pulse length, M-bus addresses, baud rate, power, voltage, current, current, power factor and frequency, control key for display switching and device parametrization, installation error detection, pulse output in optoMOSFET- version, max. 250V AC / DC 100mA (meets S0 specification), impulse factor and pulse length adjustable, M-BUS interface, assembly on the support rail. EN 50022 (TS 35). EC type-examination certificate for active energy in accordance with Directive 2004 / 22 / EC (MID = Measurement Instruments Derective). Attention! Changes in the pulse outputs are only possible once after installation in the case of calibrated / MID-compliant meters. The meter must then be locked by the measuring instrument user. M-Bus interface EN 13757-2, -3, addressing primary address = 0 (can be changed by call key), secondary address = serial number (can be changed by call key), baud rate max. 9,600 Baud (can be changed via call key), data transmission, manufacturer identification, status, energy counting, current power, medium. This DHZ + counter series is also available in other versions, such as systems in 2-conductor / 3-conductor / 4-conductor and, voltages (U) such as 1 x 230 V, 3 x 100 V, 3 x 230 V, 3 x 400 V, 3 x 500 V, 3 x 58 / 100 V and with various other interfaces. Please ask the corresponding article number in the work.Technical data System 4-conductor, voltage (U) 3x230 / 400V, current (I) 5 (80) A for reference, frequency (f) 50 Hz, display 3-line, 8-digit LCD current value indicator, accuracy (Wire) 1% (Kl. B), pulse output 2 x OptoMOSFET (250 V AC / DC, 100 mA), meets S0specification, impulse value 1000p / kWh, variable type 1 / kWh, Mp interface. DIN EN 13757-2, -3 (300 to 9600 baud), own consumption (Ue) < 2 VA per phase, own consumption (Ie) < 0.5 VA per phase, temperature range (Tb) -25 to + 55 ° C, humidity max. 95%, non-condensing, protection class (housing and connection) IP 20, weight approx. 0.45 kg, dimensions (B x H x T) (6 TE) 107.5 x 89.5 x 64 mm