DHS 4-063 FANA24DC, Doepke load separation switch compact, 63 A, 4 S, with NOT-off function and remote drive

Doepke load separation switch compact, 63 A, 4 S, with NOT-off function and remote drive

The Main switches separate electrical consumers or plant parts completely and all-politely from the electrical supply. They also switch under load or overload. They are used to shut down maintenance and plant protection. The devices of the DHS 4 series are load separation and The main switch in four-pin version where the N- contact is switched on and switched off after. Due to their design, they are perfectly integrated into the look of the DFS. DHS 4 of the FANA variant allows remote switching of devices. In addition, control elements, such as the switch-off button, can be connected via the compact, factory-side additional module. A parallel connection of several DHS 4 is also possible. The LED integrated in the load separation switch shows the trigger by a control element as well as a possible wire break. The reconnection of the load separation switch is prevented in this state. Characteristics: with NOT-off function for triggering or the shut-off by means of control elements; monitoring of the NOT-off function on wire break and display by an LED; in the case of a voltage failure, the NOx-off function does not lead to any trigger; high short-circuit strength and high switching capacity; two-sided double-deck clamps for large cross-section and collection rails; position indicator; Type of assembly: quick fitting on the support rail; feed-in from above; any installation position; Applications: especially suitable for systems such as training and class rooms. The remote drive with NOT-off function allows the power supply to be reswitched, e.g. by means of key buttons without having to leave the room and / or open the electrical distribution; Note: According to EN 60947-3, load separation switches combine the function of a load switch that can switch a current (including a specified operating overload) under operating conditions and the function of a separation switch. which ensures a safe separation by a sufficient contact distance. The DHS 4 provides a FELV voltage for the emergency-off circle. For this reason, the emergency-off circle must be measured for a voltage of 230 VAC. The lamp can be used to lock both the DHS 4 and the remote drive on or off. The remote drive must be supplied externally with 24 VDC.