SX-ARC1 B10, AFDD + LS SX-ARC1-B10, 6kA, 1P + N, 2TE Fault-arc protection + LS

Fault-arc protection (AFDD) with a fuse machine (MCB) according to IEC / EN 62606 (VDE 0665-10) and IEC / EN 60898-1 (VDE 0641-11) provide protection against serial and parallel fuse-light, protection against overcurrent (overload or short circuit), protection against overvoltage (only for AFDD internal) and protection against electrically-ignited fires in accordance with DIN VDE 0100-420.The mandatory areas of use under the DIN VDE 01000 are subject to a single-phase change system of the fire or fire-resistant (e.g. in-fire-resistant areas), in the most of the areas of the areas of the old, or in which are exposed to fire-exposed or in the areas of the areas of the use of the use of the residential buildings, and in which are mainly those in which are exposed to fire-fire-resistant (e.g., in the areas of the areas of the most of the old), or in which are exposed to the areas of the areas of the use), or in which are exposed to the areas of the use of the use of the use of the use of the use of the The use of AFDDs is recommended in rooms with sleeping facilities, rooms or places with a fire-spreading structure and high-power end circuits. In general, the AFDD is also recommended to increase fire protection against electrically ignited fires. LED indicator to identify the cause of the trigger. Your patented connection terminals with Push- In technology, ensure easy and safe contact and handling. The top, end-side Push- In clamp can be connected to conductors up to 2 x 4 mm ². On the input side, the PSX phase rails can be used for cross-wiring. The measurement power according to IEC / EN 60898-1 Icn = 6 kA.AFDD + MCB SX-ARC1 is 1pole protected (LS), 2pole switching.