2759-290 / 211-1000, Runtime; IEC-60870-Slave; individual licence

Runtime; IEC-60870 slave; individual licence

Runtime, IEC60870 Slave, Single License, Online Activation Function: The communication according to the IEC60870 protocol can be easily parametrized with the configurator. To this end, the CODESYS V3 development environment is once more extended with the WAGO Telecontrol Package. The configurator will set up the IEC-60870 objects and configure the data exchange for the PLC application or the I / O modules. Import and export functions in the CSV format enable the configured data to be passed on to other engineering tools. With this license, the protocols IEC 60870-5-101 and -104 are activated on the slave side. This allows the creation of gateways for conversion from one protocol to another, e.g. to read protective devices via Modbus and to pass the data over -104 to the network control technology. The time synchronization of the remote action substations (slave) can be done directly via the IEC-60870 protocol with the object 103 and via (S) NTP. In the reporting direction, IEC-60870-5- 101 / -104 information objects can be used for single, double and step messages - also bit patterns, counting values and normalized, scaled and floating point values. All information objects can be transmitted without or with time stamp. The same applies to the information objects in the command direction. & nbsp, An IEC-60870-5-104- Slave can simultaneously hold up to 4 connections to the control system (master). & nbsp, your advantages: using the PFC200 control as a remote function substation (slave) on an IEC-60870-5-101 / -104- control system (master) can be used to create a Gateway application to transfer data from Modbus protection devices to an IEC-60870-5- 10-101 / 4GAP, and to an Upload device. Further installation steps are not required. & nbsp, Technical Data: See chapter "The functionality of the WAGO protocol library according to IEC 60870-5-101 and -104" in the product manual "IEC-60870-protocol project.".