A9A26907, auxiliary contact, communication switch, Acti9, iSD, 1 changer, 100mA to 6A, 24VAC to 415VAC, 24VDC to 130VDC, connection below

Additionally available packaging sizes: 12 / 120

FM-HS ISD 1W for IC60 / IID 100mA - 6AThis electrical accessory of Acti9 is a changer (closing / opening) to display the position of the control switch in case of an electrical error or a trigger. Operating current from 100mA to 6A at a frequency from 50Hz to 60Hz at 240VAC and from 100mA to 3A at a frequency from 50Hz to 60Hz at 415VAC. Operating current at 100 mA at 24 VDC up to 130 VDC. Operating current of 6A is 24VDC, 2A is 48VDC, 1.5A is 60VDC, 1A is 110VDC and 130VDC. It has 1 position switch with type 1 contacts. For installations in small commercial companies or buildings. This electrical accessory is compatible with Acti9 series such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iC40 XA, iCV40 XA, iC60 RCBO. This error contact is compatible with Acti9 series such as Acti9 iDT40, iDT40 XA and iDD40. The iSD is used for either the device short name or the compatibility code. The mechanical indicator is provided on the product for the signaling (local). Screw terminal connection at the bottom. The connection allows rigid copper cables. The cable cross-section ranges from 1mm ² to 4mm ². In the case of flexible copper cables, the screw terminal connection below allows a cable cross-section from 0.5 mm ² to 2.5 mm ². Screw terminal connection at the bottom. The connection allows rigid copper cables. The cable cross section 2 cable allows a cable cross section of 2.5mm ². He's got a screw clamp on the bottom. The connection is flexible with anterior copper cables (2 cables). The cable cross-section is 1.5 mm ². The design insulation voltage (Ui) is up to 500 V. The design shock voltage (Uimp) is 4kV. The width in 9 mm division is 1. The dimensions are (B) 9 mm x (H) 86 mm x (T) 73 mm. The colour of the product is white (RAL 9003). The level of pollution is 3. Tropical sensitivity is treatment 2. The tilt torque of the connection is 1N.m (below) for the type PZ1 screw. According to IEC 60529, the IP20 level of protection is. The operating temperature is between -35 ° C and + 70 ° C. The storage temperature is between -40 ° C and + 85 ° C. This product meets the standards EN / IEC 60947-5-1 and GB / T 14048.5. This product is certified with the CE and UKCA characters.