770-773, snap-in plug; 3-pin; Cod. B; light green

Sap-in plug; 3-pin; Cod. B; light green

Snap-in plug, 3-pin, Kod. B, 4.00 mm ², light green pen bar WINNA ® MIDI 3-polisThe pen bar WINNA ® MIDI 3-pole is the plug-in solution for your application in the control cabinet, on the PCB or at the light connection. The installation connectors of WAGO are used when criteria are repeated to an electrical installation or are divided into a specified grid, for example when installing grid or inlay lamps. For more safety in the electrical installation, the installation connector is equipped with a mechanical failure protection. The installation connector is protected according to the protection type IP20 (In a locked state: IP2xC (these installation connectors are not intended for use in easily accessible areas!). This means that the finger cannot be used to reach a voltage-leading contact element. Installation connectors of the WINNA ® MIDI family encoding B are available in grey, light green or pink, allowing a differentiation of circuits such as: For example, for lighting, pumps or blinds. In addition, it is possible to use adjusted pole markings. The installation connector can be used for a current load up to 25 A. It can therefore also be used for high-performance consumers. The WINNA ® MIDI connector system with Push- in CAGE CLAMP ® spring connection technology stands for a safe electrification. Thanks to the integrated test opening, connections can even be controlled in a locked state. They thus save time and reduce the effort during installation. The installation of the snap-in is done by locking. Thanks to the locking pin, this is intuitive and safe without the connection. Push- in CAGE CLAMP ® spring connection technology - installations are incorrectly installed, rather than inconvenient to screw! The WINNA ® connector system is optimally tailored to the high requirements in the building installation. It makes electrical installations plug-in and thus faster, even safer and error-free. The made-up system solution reduces the time of installation and installation errors on the construction site. Take advantage of the maintenance-free spring clamping technology in the plug-in version! Plan your installation with protection type IP20 from WAGO. Failed installation connector simple circuits for controls in the automation installed, immediately quick exchange of defective units in running operation