Knipex Hand Ratcheting Crimp Tool

Crimping pliers for coaxial connectors RG 58 / 59 / 62 / 71 / 223

Features and benefits

- Amplified force thanks to the toggle gearing for less tiring work- Good grip thanks to its 20° angled head, low weight and short shape- High-quality repeat crimping thanks to integrated lock (automatic release mechanism)- Crimping pressure precisely defined (calibrated) at the factory, also adjustable- Optimum force transmission through lever for fatigue-reducing operation- Low weight- Compact design- Ergonomic handles- Optionally available: positioner for non-insulated open-barrel connectors- Capacities mm² / AWG : for KOAK, BNC and TNC coaxial cable connectors for RG 58 / 59 / 62 / 71 / 223, SW for contact pin: 1.72 mm, SW for RG58 shield: 5.4 mm, SW for shielding RG59, 62 and 71: 6.48 mm- Material: Special grade chrome vanadium electrical steel, oil quenched

- Amplified force thanks to the toggle gearing for less tiring work- Good grip thanks to its 20° angled head, low weight and short shape- High-quality repeat crimping thanks to integrated lock (automatic release mechanism)- Crimping pressure precisely defined (calibrated) at the factory, also adjustable- Optimum force transmission through lever for fatigue-reducing operation- Low weight- Compact design- Ergonomic handles- Optionally available: positioner for non-insulated open-barrel connectors- Capacities mm² / AWG : for KOAK, BNC and TNC coaxial cable connectors for RG 58 / 59 / 62 / 71 / 223, SW for contact pin: 1.72 mm, SW for RG58 shield: 5.4 mm, SW for shielding RG59, 62 and 71: 6.48 mm- Material: Special grade chrome vanadium electrical steel, oil quenched

Typical applications

Crimping pliers can be used in many applications:- Maintenance and repair - Electrical installations- Crimp shop

Crimping pliers can be used in many applications:- Maintenance and repair - Electrical installations- Crimp shop

Product Maintenance

- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly. - Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants. - The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.*Use a light non-mineral oil

- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly. - Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants. - The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.*Use a light non-mineral oil