ZAS202VE14, ZAS, universZ, 202,1ZP, eHZ, 4P, VNB

ZAS, universZ, 202,1ZP, eHZ, 4P, VNB

Cutting column 202, universal Z, 1 counter place, eHZ, 4-pin, VNB. Counter connection column, protection type IP 44, as the base column including the engraved base, made of glass fibre-reinforced polyester FS 833.5 according to DIN EN 14598. By means of additional components, the base column is extended to a connected column of the corresponding VNB. Profiled case in the rib design. Door with opening angle 180 degrees with free stand and 90 degrees with mounted housings. The right door is open. Closing with turning lever and three-point basket closure with 1 or 2 profile half-cylinders. Built-in cylinder bottom with the same series. A second locking cylinder (e.g. from VNB locking system) can be installed at the top after removing the four-channel lock. If no second profile half-cylinder is installed, the second upper opening must be fitted with a blind cap. The ventilation is done via labyrinth-shaped ventilation channels, prevents the penetration of foreign bodies and is stunningly safe. Density connection columns are built according to technical guidelines: open-air connection cabinets / connection of fixed switching and control cabinets and counter connection columns to the low voltage network of the VNB. The installation consists of protection-insulated counter fields DIN 43870 (functional surfaces) for counter. Counters are set up for an IP54 cover. The base and the counter connection column form a unit. A floor rust is recommended. In order to avoid the inlet, the base shall be filled with a socket-filling device up to the height of the cable-fitting rail.