ZAS207BD25A, ZAS, universZ, 207,2ZP, 3HZ, 5P, LF, base, APZ

ZAS, universZ, 207,2ZP, 3HZ, 5P, LF, base, APZ

Counter connection column 207, universal Z, 2 ZP, 3point, 5-pole, empty field, base, APZ.counter connection column, protection type IP 44, as base column including engraved base, of glass fibre-reinforced polyester FS 833.5 according to DIN EN 14598. The counter connection column meets the requirements of the DIN VDE 0603-1 (VDE 0603-1): 2017-06 in conjunction with the DIN VDE 0603-2-1 (VDE 0603-2-1): 2017-06.The system is also based on the applicable application guidelines of the VDE-AR-N 4100: 2019-04 including the associated correction VDE-AR-N 4100 Ber 1: 2019. By means of additional components, the base column is made into a connected column of the corresponding VNB. Profiled housing in the rib design. Door with opening angle 180 degrees with free stand and 90 degrees with mounted housings. The right door is open. Closing with turning lever and three-point basket closure with 1 or 2 profile half-cylinders. Built-in cylinder bottom with the same series. A second locking cylinder (e.g. from VNB locking system) can be installed at the top after removing the four-channel lock. If no second profile half-cylinder is installed, the second upper opening must be fitted with a blind fasten.The ventilation is done via labyrinth-shaped ventilation channels, prevents the penetration of foreign bodies and is stunned. Density connection columns are built according to technical policy: open-air connection cabinets / connection of fixed switch and control cabinets and counter connection columns to the low voltage network of the VNB.The installation consists of protected-insulated counter fields DIN 43870 (functional surfaces) for counters. Counters are set up for an IP54 cover. The base and the counter connection column form a unit. A floor rust is recommended. In order to avoid the inlet, the base shall be filled with a socket-filling device up to the height of the cable-fitting rail.