C.A 1950, C.A 1950 DiaCAM2 Thermal imaging camera

C.A 1950 DiaCAM2 Thermal imaging camera

Stronger strengths of the CA 1950Exceptional long battery operation time of 13 hours fast ready to use after only 3 seconds of extendable table with emission value possibility of renaming photos and heat images according to the location and storage of the camera configuration, depending on the type of use (buildings, control cabinets,...) language comments can be stored directly with the recording of bluetoth- connection to multimeters and multiple measuring tongs, so that all the measurement data is available at the same time, the camera has been developed for simple operation and is especially suitable for mechanical applications in the building technology, as well as in the mechanical and maintenance technology. It allows: - energy audits on buildings - search for cold bridges, heat holes, wet walls,... - electrical maintenance: detection of shady contacts, unevenly distributed loads,... - mechanical maintenance: search for places with high wear, engine overheating, lubrication defects,... The simple use was at the heart of the development efforts: - convenient handling, access to all functions with a hand-held installation of the camera on a table, - large image reproducing on the 2.8- automatic brightness screen, - with the use of the heat-controlled data - can be provided - with a high-speed reading of the heat-controlled data - with a high-speed display of the CA, - with a high-speed reading and a high-speed reading of the temperature - with a high-speed reading of the most-to-to-to-to-speed reading of-to-the-speed reading of-to-speed, - and-to-speed-to-speed-to-speed-speed-to-speed, - with-to-speed-to-speed-to-speed-speed-speed, - with-speed-speed, - with-to-to-to-speed-to-speed-Existing table with emission values that can be extended at any time CAmReport also allows the automatic production of reports according to different templates. These reports can be exported in Word or PDF format and thus facilitate processing and archiving. Further technical data sensor type: 80 x 80 microbolometer UFPA, 8 ~ 14? m- IFOV (spatial resolution) 4.4 mrad temperature range: -20 ° C to 250 ° C - display mode: thermal image and photo image with automatic parallax balancing. To match the images with the PC software measurement tools: 1 manual cursor + 1 automatic detection + min / max display within an adjustable area + temperature profile + isotherm parameter settings: emission, ambient temperature, distance, relative humidity storage on a micro- SDcard with 2 GB (about 4000 images). Map replaceable by models up to 32 GB protection type IP 54- weight / dimensions: 700 g with batteries / 225 x 125 x 83 mm