C.A 8333, C.A 8333 Power and energy analyser

C.A 8333 Power and energy analyser

Stronger Direct access to main functions (settings, etc.) Direct access to measuring functions (upper swings, flicker, etc.) Voltage and power inputs with color markers Excellent readable, large TFT color screen network independent for 13 hours Description All parameters on a glance The quality star + C.A 8333 is particularly suitable for maintenance and testing services in industrial and commercial plants. It provides an immediate image of the most important network quality parameters. With its functions, this analyser is particularly suitable for maintenance and repair. The complete energy balance of a plant can be created. For the dimensioning of electrical systems and for the detection of switching errors, the C.A 8333 has a transitory mode that allows the start-up current to be determined over 4 network periods. The compact, handy device offers additional calculation and operating functions. The C.A 8333 has 3 voltage and power inputs. With the C.A 8333 all parameters, transporters, alarms and signal forms are recorded and stored at the same time. The current converters used are automatically detected by the C.A 8333 when you connect. Different power transducers can be connected and the adjustment of the translation conditions allows a direct reading of the measured value. The device is designed for local work: the quality star + C.A 8333 can be used in many ways. It can be used in CAT III to 1000 V and CAT IV to 600 V plants. The PAT software and the Dataview ® software are optionally available for the processing of the values measured by the quality star. They allow for setting settings, data transfer and processing and analysis. Data view ® can also create standard test reports on the voltage quality characteristics. Special accessories With the ESSAILEC measuring line, tests on meters, on built-in protection relays or on secondary circuits of voltage or power transducers can be carried out without disturbing or interrupting the power supply. Reeling Boxing This practical cable retractor has a adhesive magnet and has the MultiFIX holder system. The user can roll in measuring lines with banana plugs for voltage measurements or the cables of the MiniFlex ® MA193-250 for current readings and process in the length as required - so the measuring lines are always well-equipped. The power adapter PA31ERWith it the quality star + can be supplied directly with power with 100 V to 1000 V, AC or DC via a power phase conductor. It is connected to the voltage inputs and has the following technical data IP53IEC 61010 CAT III 1000 V / CAT IV 600 V.All quality + are equipped with a set of colored rings and pins for the easier detection of measuring lines and inputs and for the colour marking according to the countrys.Large selection of power transducers for flows from 5 mA to 10 kATechnical data voltage (TRMS AC + DC) are available with a range of 10-1000 Vcurrent (TRMS AC + DC): 5 mA to 10 kA according to the frequency transducer: PW, PW, PW050-5-5, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PW, PWeight: 1,9 kgFor the view of documents available in other languages