540100, S3000 Uni- LED dimes. Comfort use

S3000 UniLED dimes. Comfort use

System 3000 universal LED dim use Comfort - switching and dimming of filament lamps, HV halogen lamps, electronic transformer for halogen or LED lamps, dimmable inductive transformer for halogen or LED lamps, HV LED or compact fluorescent lamps. - Connection of remote points possible. - Automatic or manual setting of the dim principle appropriate to the load (phase or phase). - display of the set mode of operation by means of LED. - switch on lamp-gentle. - Enable to be permanently stored. - switching on with last set brightness or stored on-line brightness. - Hotel card function can be activated: light switches on after voltage interruption (from index level 02). - Minimum brightness adjustable. - Electronic short circuit protection. - Electronic overtemperature protection. - operation with and without a neutral conductor connection. Combination with RF operating kit 1-fold / 2-fold for KNX: - dimactor channel 1-fold. - Sensor channel 1-fold or 2-fold. - Local control of the system 3000 use possible. - Radio control of other devices for KNX as a sensor possible. - {b} Function selection of the use: {\ b} dimming behaviour and dimming line adjustable, soft-on and soft-off function, thread function, stairway function with off warning, scene function (16 scenes), blocking function, time delays. Remote input as additional control for the system 3000 use or for radio control of other KNX devices as sensor. In principle, the operation of the dimmer is possible without connection of the neutral conductor, but some LED and CFL light sources require the neutral conductor connection to avoid flicker appearance. The minimum load for filament lamps, HVhalogen, Tronic Trafos and wrapped trafos is increased to 50 W. Electronic Trafos and ballasts for LED lamps can be operated in the dimming process specified by the manufacturer. At a higher ambient temperature than 25 ° C, the connected load shall be reduced.