540300, S3000 relay. Use

S3000 relay. Use

System 3000 relay control - switching of lighting and single-phase engines. - Control of electric floor heating and thermal actuators in combination with a room temperature control kit. - Adaptive zero point connection. - Connection of remote points possible. - Automatic shutdown of the load. After-run times can be adjusted in five steps, not at night. - functional test operation. - operation with a neutral line connection. Combination with RF operating kit 1-fold / 2-fold for KNX: - switch-actuator channel 1-fold or heating unit 1-fold. - Sensor channel 1-fold or 2-fold. - Local control of the system 3000 use possible. - Radio control of other devices for KNX as a sensor possible. - Temperature detection. - {b} the function selection of the use for switches: {\ b} closing / opening operation, stairway function with a stop warning, scene function (16 scenes), blocking function, time delays. Remote input as additional control for the system 3000 use or for radio control of other devices for KNX as sensor. - {b) the choice of function of the use for room temperature control: {\ b} the control of 230 V actuators, heating, cooling, heating and cooling, switching of the heating or cooling operation by means of communication object or remote input. PWM and 2-point controller, absolute and relative set value, heat control including Cascading, valve protection function. Cyclic monitoring of floor temperature, service operation for valve output, frost protection function (automatic or via communication object), comparison of temperature sensor, boot function, summer and winter compensation, scene function (16 scenes). At a higher ambient temperature than 35 ° C, the connected load shall be reduced.