100940, emergency power module for the second life path, including support battery

Emergency power module for the second rescue path, including support battery

This roller shutter and redeeming control for the second rescue path ensures that even in the event of a power failure you can still drive the connected drive. In the case of fire, there is often a house-wide power failure, which makes it impossible to use non-battery-buffered drives. In order to keep the second rescue path open, we have developed this intelligent control with support battery. In normal operation, the connected battery is constantly charged via the module. As soon as the current fails, the engine can be operated as usual. From a battery charge of 30%, the control will output a signal tone for each operation to signal that the battery will no longer be charged. If the battery charge continues to fall to 10%, the module only carries out travel in the direction of operation to ensure that the roller shop or blinds can always be opened in an emergency. The battery is constantly monitored by the module. After 2 years or 1000 practice, the battery should be tested and, if necessary, exchanged. The module signals this by means of an alarm (signal tone at 30-second interval), which can be disabled by a connected, unlocked switch for 24 hours. The module offers connection possibilities for 2 potential-free operations. The pre-location operation switches the module into a 120- second self-attitude after a key command. The central operation runs in total operation and can also be connected to potential-free smoke detectors. The control can be combined with 12V roller shutter or blinds (e.g. Art.-No. 112030 or 148050). The maximum switching power of the module and the battery is 5 ampere. The package contains the control module and the new battery in a particularly small design. The two components are designed for use in an UP- Electroniccan. The cables from the battery to the module can be easily connected to the connected connection. The cable length is 150mm. The supply voltage is 230V (50Hz). Dimensions module: 48x45x23mm, dimensions battery pack: 70x55x18mm