338000, REG-Control, central control for 12 engines, many parameters adjustable

REG-Control, central control for 12 engines, many parameters adjustable

The central control system control provides a fully functional yet cost-effective, home-wide roller shutter, blinds and brand control. With connection possibilities for up to 12 engines, 12 individual controls, 3 group controls, one central operation and all sensor systems, this control does not leave any wishes open. Each connected engine can be assigned to one of the engine types of roller loading, blinds or marking, which means that the pre-programmed operating logic (e.g. autom. Reverse and typing for blinds; autom. The use of this method is not recommended. The menu also allows different sensors and groups to be assigned to each engine, as well as time circuits and running times. In order to expand the system, it is easy to connect other devices of the same type or small extension modules (art. No. 338100 + 338200) by network cable. This means that large objects such as schools or public buildings can be connected quickly and clearly. If the system is supplemented by up to 3 sun sensors (for 3 facades), a wind sensor and a insulation sensor, the full potential of the control is finally shown. For the sun command, the individual running times for each engine and thus the desired descent height can be stored. The entire automatic (except wind) can be activated and deactivated via an additional ON / off switch. The individual, group and central controls work in a self-contained manner (single operations in blinds with typing operation). The menu-led setting is clear and easy to learn. A special hardware or software is not required for the first setting or for subsequent changes, which is particularly much easier for small changes in the daily switching times. The following buttons do not require external power supply, as the potential is provided by the control. The supply and switching voltage is 230V (50Hz). The practical plug terminals can be easily fixed and solved again. The device is designed for use on the DIN-Hut rail and the total width is 216mm (12 TE). Dimensions 216x88x58