دسته بندی ها
کاربر سایت شوید
تابلو و توزیع برق
/
پشتیبان گیری مواد
/
شکستن مدار برای ترانسفورماتور، ژنراتور و حفاظت از سیستم
/
HET040GR
وضعیت
:
موجود در انبار اروپا - زمان تحویل 4 تا 6 هفته
برند
:
Hager
تایپ کالا
:
HET040GR
کد سازنده
:
HET040GR
کد EAN
:
3250613176150
ویژگیها
Icu at 400 V, 50 Hz
70 kA
Number of help contacts as opener
0
Number of help contacts as close
0
Rated current
40 A
Complete unit with protection unit
Yes
Engine drive integrated
No
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام
RK-PV 4-L, range clamp housing, transparent, protection type IP66, max. Lead cross section 6 ², impact resistance IK08, protection class II, halogen-free
NCN406, LS switch 4 pole 10kA / 15kA C -6A 4M
AES 1102.4 42 VAC, NOT-HALT and protection guard AES 1102.4
AG13, AG13 cover 450x250mm o.Slit accessories CombiLine interior design system
= = References = = h3 + P250 LSnI 3x40A 70kA
H3 + P250 LSnI 3P3D 40A 70kA FTC.The compact power switch in accordance with DIN EN 60947-2 protects the electrical system and networks from overload and short circuit. The trigger curve of the electronic trigger can be set by means of a rotary rest switch. The trigger for the overload current (Ir) and the short-term short-circuit current (Isd) can be separated. The immediate trigger for the short circuit current Ii is fixed. A ready-to-use LED lights green when the trigger is ready for use and blinks orange when an internal error is detected in the trigger. Another LED starts to flash red when I = 105% Ir, and lights permanently red when I 112% Ir. At the position of the slave the three different operating states are visible (one = above, OFF = below, triggered = middle position). A device for locking the switching state in ON or off position is integrated and can be used with a commercial padlock without additional accessories. A trigger key can be used to test the trigger emanism and open the main contacts. A folding cap with an unlegible quick screw allows access to the installation room for optional help contacts and other triggers. Integrated accessories can be identified and identified via the view window without opening the folding cover. The set trigger curve can be tested and documented by means of an interface for a diagnostic and configuration tool.
شما هم می توانید دیدگاه خود را درباره این کالا ثبت کنید.
دیدگاه خود را ثبت کنید
HET040GR, benefit. h3 + P250 LSnI 3x40A 70kA
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام