M9A26904, auxiliary contact, Multi9, OF, 1 changer, 100mA to 6A, 24VAC to 415VAC, 24VDC to 130VDC, connection below

Auxiliary contact, Multi9, OF, 1 changer, 100mA to 6A, 24VAC to 415VAC, 24VDC to 130VDC, connection below

This electric accessory of Acti9 is a changer (closing / opening) to display the position of the OPEN or CLOSING of the power protection switch. Operating current is 6A from 24VAC to 240VAC, 3A from 277VAC and 415VAC at a frequency of 50Hz to 60Hz. Operating current of 6A is 24VDC, 2A is 48VDC, 1.5A is 60VDC, 1A is 110VDC and 130VDC. It has 1 position switch with type 1 contacts. For installations in industry and at OEMs. This electric accessory is compatible with the multi-9 series such as C60BP, C60SP, C60 and N40. The OF is used for either the device short name or the compatibility code. Screw clamp connection at the bottom. The connection allows rigid copper cables with a cable cross-section of 2.5mm ². Screw terminal connection at the bottom. The connection allows flexible copper cables. The cable cross section 2 cable allows a cable cross section of 1.5mm ². The Ui-design insulation voltage is up to 500 V. The Uimp is 4kV. It can be mounted on a DIN rail for modular installation. The width in the 9 mm grid is 1. The dimensions are (B) 9mm x (H) 85mm x (T) 68mm. The colour of the product is white. The product weight is 30 g. The level of pollution is 3. The degree of tropicalisation is treatment 2. The isolation length is 9 mm. The tilt torque for the connection is 1N.m (below) for the type of screw PZ1. The IP protection type is IP20. The operating temperature is between -25 ° C and + 70 ° C. The storage temperature ranges from -40 ° C to + 85 ° C. This product meets the standards EN / IEC 60947-5-1, GB / T 14048.5, GB / T 14048.17, UL 1077, UL 489, CSA C22.2 No 0-10, CSA C22.2 No 5-13, CSA C22.2 No 235-04 and CSA C22.2 No 65-03. It has EAC- and CC- quality marks and is certified with CE, UKCA, UL- and CSA certificates.