دسته بندی ها
کاربر سایت شوید
وضعیت
:
موجود در انبار اروپا - زمان تحویل 4 تا 6 هفته
برند
:
Schneider
تایپ کالا
:
A9Z64440
کد سازنده
:
A9Z64440
کد EAN
:
3606489502829
ویژگیها
Selector type
No
Fault current type
B
Connectable cross-section of the conductor
1... 25 mm ²
Installation depth
44 mm
Current
40 A
Type of protection (IP)
IP20
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام
مشاهده جزییات فنی کالا :
Fault current protection switch all-current sensitive iID, 4P, 40A, type B-SI, 300mA
Fault current protection switch All-current sensitive Acti 9 iID. 4-pole, nominal current 40A, type B-SI, nominal error current 300mA, operating voltage (Ue) 400 AC, 50Hz, insulation voltage 500V AC. Jump switch for low-wear switching of contacts. With mechanical front-side error indicator (VisiTrip) for display of triggers by error current. Safe contact display (VisiSafe) of the power protection switch, in case of green display security of the voltage freedom on the exit side. Test key for the regular test of the function. Double connection terminals for both sides connection of cables or phase rails. Easy removal of the single device with the installed phase rail, thanks to the front-side mounting element. In addition, rearward auxiliary modules (optional) under-voltage triggers (iMN), overvoltage triggers (iMSU), working current triggers (iMX), auxiliary to status message (iOF), error message switch (iSD). Type B-SI is integrated into the SI-technology, which offers higher strength against electrical interference. Protects with smooth simultaneous error flows in 1 or 3-phase supply networks caused by frequency inverters, inverters & amp, emergency power supply. Color RAL 9003. meets the following standards IEC / EN 61008-2-1, IEC / EN 62423, IEC 61543, VDE 0664.
شما هم می توانید دیدگاه خود را درباره این کالا ثبت کنید.
دیدگاه خود را ثبت کنید
A9Z64440, error current protection switch all-current sensitive iID, 4P, 40A, type B-SI, 300mA
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام