DW353126, pressure sensor, Ø38mm 122lang, 0-400bar, 12-32V DC, pressure sensor, Ø38mm 122lang, 0-400bar, 12-32V DC,

Pressure sensor, Ø38mm 122lang, 0-400bar, 12-32V DC, pressure sensor, Ø38mm 122lang, 0-400bar, 12-32V DC,

The ipf electronic pressure guards offer a high level of user comfort. The DW34 series has a ½ inch connection with front-mounted membrane and can be used up to a pressure of + 600bar. The media-touching parts of the sensor are made of stainless steel. The DW35 is different from another measuring power supply. It has a ¼ inch connection with external thread and can also be used up to a pressure of + 600bar. As with the DW34 series, the media-touching parts of the sensor are made of stainless steel. The pressure guard DW36 is suitable for measurements in the low and low pressure range. This guard has a 1 / 8 inch connection. It is made of ceramic and is used in the range of -1 to + 1bar. The 4-pin devices have 2 outputs. While output 1 is a freely programmable switching output, output 2 can be selected between analog, switching or alarm output. The devices with 8-pin connection have 2 switching outputs and an analog output. The film keyboard can be used to program the switching and return points, the output logic and time delays. For dynamic measurements, the display and the analog output are equipped with an adjustable damping. After assembly, the sensor body can be rotated by 350 ° and the sensor display can be rotated by 180 ° using software. The pressure guards have an optical interface with which all setting parameters can also be set and changed via PC or notebook. The test function provides a simple and quick way to check the operation of the device or the on-board evaluations. Each pressure value of the pressure range can be "simulated" by the control keys or by PC- operation. The device behaves as if the actual pressure was present. For example, pressure monitoring for hydraulic units vacuum control for pressure transverse compressor control