771-8965 / 007-102, made-up line Eca distribution with phase change / plug 5-pin encoding A 2.5 mm ² 1 m white

made-up connection Eca distributor with phase change / plug 5-pin encoding A 2.5 mm ² 1 m white

made-up line, Eca, distributor with phase change / plug, 5-pole, Cod. A, H05VV-F 5G 2.5 mm ², 1 m, 2.50 mm ², white-made connection line WINNA ® MIDI with train load The assembled connection line WINNA ® MIDI 5-pole creates the condition for the assembly of the enemy-wire and one-wire conductor. The installation connectors of WAGO are used when criteria are repeated to an electrical installation or are planned in a specific grid, for example when installing grid or inlet lamps. For more protection in the electrical installation, the installation connector is equipped with a mechanical failure protection. The installation connector is protected in accordance with the protection type IP20 (In a locked state: IP2xC (these installation connectors are not intended for use in easily accessible areas!). This means that the finger cannot be used to reach a voltage-leading contact element. Standard network applications for almost every application range can be implemented with WINNA ® MIDI installation connectors with encoding A. Rated current and voltage are important criteria in the selection of an installation connector: they inform about the product's applications. For this product the measuring current is 20 A - it is also suitable for high-performance consumers. The WINNA ® MIDI connector system with Push- in CAGE CLAMP ® spring connection technology stands for a conscientious electrification. Due to the installed test opening, connections can be controlled even in the installed state. They thus save time and reduce the effort during installation. According to BauPVo, the fire class of the lines used in the construction is also decisive for building safety. For buildings with normal safety requirements, made-up lines with the fire class E.Stocks instead of screws - made-up lines of WAGOThe made-up line is equipped with a distributor with phase change and a plug. WINNA ® is the connector system, which is excellently tailored to the high requirements of the electrical installation. It allows the safe, fast and, above all, error-free assembly of components and lines. You will now also reduce your costs during installation without giving up quality and safety: with fire class E, you will reduce service costs and avoid unnecessary downtimes. The number of metal is a purely commercial calculation and, although usually specified in kg / km, may differ from the actual metal weight.