771-9985 / 116-501, made-up connection Eca socket / open end 5-pin encoding I 1.5 mm ² 5 m blue

made-up connection Eca socket / open end 5-pin encoding I 1.5 mm ² 5 m blue

made-up connection line, Eca, socket / open end, 5-pole, Kod. I, H05Z1Z1-F 5G 1.5 mm ², 5 m, 1.50 mm ², blue-made connection line WINNA ® MIDI 5-policy-effective connection connections are stuck, rather than weirdly screw: with the made-up connection WINTA ® MIDI 5-policy. Installation connectors from WAGO come to the train when requirements are repeated to an installation or are divided into a defined grid, for example when installing grid or inlay lights. For more safety in the electrical installation, the installation connector is equipped with a mechanical failure protection. The installation connector is protected according to the protection type IP20 (In a locked state: IP2xC (these installation connectors are not intended for use in easily accessible areas!). This means that the finger cannot be used to reach a voltage-leading contact element. A regulated lighting device, such as the DALI standard, is the main purpose of WINNA ® MIDI installation connectors with encoding I. Flexibility in the electrical installation of our product family WINNA ® MIDI. The Push- in CAGE CLAMP ® spring connection technology ensures a time-saving and error-free installation that meets different requirements individually and flexibly. This product complies with all minimum safety requirements of fire class E and is therefore operational in fire protection relevant sections. In the production of this made-up line, the halogens were deliberately omitted. This makes an important contribution to environmental protection. Flaw-free and fast assembly thanks to WAGOWith a socket and an open line end the line is made up. The WINNA ® connector system is perfectly tailored to the high requirements of the building installation. It makes electrical installations plug-in and thus faster, even safer and error-free. Thanks to the made-up system solution, the installation times and installation errors on the construction site are reduced equally. You also now reduce your costs during installation without giving up safety and quality: with IP20 protection, you reduce the service effort and avoid unnecessary downtimes. Failed installation connector for controls in the automation for use in the building automation (control of light) installed, immediately usable exchange of defective units in the current operation metal number (copper): 35,906 per 100 pieces The metal number is a purely commercial calculation size and may differ from the actual metal weight, although usually specified in kg / km.