Raise3D Hotend for use with E2, Raise3D 0.4mm

The RAISE3D's E2 left hot end assembly includes a brass nozzle, aluminium heating block, throat tube (built-in PTFE tube), thermocouple, heating rod and the terminal. The black wire is the thermocouple and the white wire is the heating rod. The voltage is 24V, and the power is 25-30W. Raise3D E2 left hot end assembly is suitable for V3 brass nozzle of 0.4 mm and V3 hardened nozzle. The heating block has been marked for the left extruder. The nozzle of the extruder is seamlessly connected to the throat tube to prevent leakage or blockage of filaments.

The RAISE3D's E2 left hot end assembly includes a brass nozzle, aluminium heating block, throat tube (built-in PTFE tube), thermocouple, heating rod and the terminal. The black wire is the thermocouple and the white wire is the heating rod. The voltage is 24V, and the power is 25-30W. Raise3D E2 left hot end assembly is suitable for V3 brass nozzle of 0.4 mm and V3 hardened nozzle. The heating block has been marked for the left extruder. The nozzle of the extruder is seamlessly connected to the throat tube to prevent leakage or blockage of filaments.

Compatible with the RAISE3D E2 printerAnti-leakage and anti-clogging designNozzle can be replacedHeat resistant with maximum working temperature of 300°CPackage size (WxHxD) is 130 x 110 x 20 mm

Compatible with the RAISE3D E2 printerAnti-leakage and anti-clogging designNozzle can be replacedHeat resistant with maximum working temperature of 300°CPackage size (WxHxD) is 130 x 110 x 20 mm