6SL33001AE325AA0, Braking Modules 50,00 kW

Braking modules 50,00 kW

SINAMICS BRAKING Module Input: DC 600V Output: 250kW / 15S for Chassis device GX Braking Module SINAMICS Braking Module Component chassis for the SINAMICS S120 inverter system. A Braking Module and the assigned external brake resistance are required to be able to set down drives in the event of power failure (e.g. in the case of NOT-HALT) or to limit the intermediate circuit voltage in the case of short-term generator operation, if, for example, the line module is not reusable. The Braking module contains the power electronics and the associated control and also works independently from the inverter control. In operation, the intermediate cycle energy is converted into loss heat into an external brake resistance and a parallel operation of several Braking modules is possible, with a separate brake resistance to each Braking module being connected. The Braking Modules are intended for installation in motor modules or power modules in air-cooled design and are cooled by the fans of these modules and the supply voltage for the electronics is taken from the intercircuit. The advantage is that the connection of the Braking module to the intermediate circuit by the rail sets or flexible lines included in the supply and the Basic Line modules size GB or A separate set of form cables is provided by the DG. The use threshold of the Braking module can be adjusted via a DIP switch. In addition, the braking performance specified in the technical data shall apply to the upper application threshold. The Braking module design chassis is available in a three-phase voltage range from 380 V to 480 V with an intermediate circuit voltage from 510 V to 720 V, a three-phase voltage range from 500 V to 600 V with an intermediate circuit voltage from 675 V to 900 V and a three-phase voltage range from 660 V to 690 V with an intermediate circuit voltage from 890 V to 1035 V. The Braking Module is also available in the FX / FB, GX / GB / GD and HX / JX sizes. In addition, a form cable set for the installation of a Braking module size GX into a Basic Line module size GB or DG available. SINAMICS - the continuous drive family for each application.