دسته بندی ها
کاربر سایت شوید
وضعیت
:
موجود در انبار اروپا - زمان تحویل 4 تا 6 هفته
برند
:
Legrand
تایپ کالا
:
415965
کد سازنده
:
415965
کد EAN
:
3414971179608
ویژگیها
Rating power according to IEC 60947-2
10 kA
Measurement voltage
230 V
On-line neutral conductor
Yes
Overvoltage category
3
Fault current type
A
Control voltage type additional device
AC
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام
مشاهده جزییات فنی کالا :
DX3 AFDD fire protection switch with FI / LS switch C10A, 1P + NR, 10kA, 30mA, type A, 3TE
Legrand fire protection switch DX3 STOP ARC. According to EN 62606, VDE 0665-10, EN 61009-1, VDE 0664-20. AFDD with FI / LS switch, 1-pole, with connected neutral conductor, type A for AC and pulsating DC current, unhesitant, measurement voltage Idn 30 mA, impact current up to 250 A. Installation of auxiliary equipment possible. Action indicator: yellow = error current or test key trigger, colourless = short circuit or hand trigger. The fire-protection switch DX3 STOP ARC is a combination of fault-light arc protection device AFDD with fault-protection switch and line-protection switch. The one-polated and two-polated AFDD with FI / LS switch offers a secure all-poly shutdown with the following error images: error current against earth, overload, short circuit, parallel and serial error light arches. With LED state indicator for the recognition of the operating status, message for the visual detection in case of an error-light arc. The self-monitoring of the AFD unit is carried out via an internal daily self-test. For example, the causes of the formation of fault light arc are: damaged conductor insulation by nails, screws or holes, squeezed cables or lines, loose or faulty clamping points in sockets or screw connections.
شما هم می توانید دیدگاه خود را درباره این کالا ثبت کنید.
دیدگاه خود را ثبت کنید
415965, DX3 AFDD fire protection switch with FI / LS switch C10A, 1P + NR, 10kA, 30mA, type A, 3TE
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام