EFUFK7520, EasyFoam UFK cable box 110x230x270 mm cable shard S90, foaming in walls

EasyFoam UFK cable box 110x230x270 mm cable shard S90, foaming in walls

EasyFoam UFK cable box "System Wichmann" ® Z-19.15-20. Fire-resistant S90 closures of cable transmissions for foaming in walls. The three-sided cable box consists of a galvanized steel sheet housing, lined with fire protection agent that is foaming in the case of fire. The fire is functionally separated from the calamity seal and works independently of the seal. The function of the cable box is not interrupted during post-alloy work. The cable closure is supplied as an industrial pre-manufactured and functional and ready-to-assembly component and is foamed on site. False and overlay are almost excluded due to construction. The EasyFoam UFK cable box can be mounted directly on the ground by means of already laid cables, because its base is open. Only one EasyFoam UFK component with the same height must be installed per EasyFoam UFK. The contained EasyFoam foam stoppers are used for calvary sealing. They have a much lower density and are therefore easier and faster to process than for example fire protection stopper. The sealing to the cables and to the housing is carried out with a permanent elastic sealant (e.g. silicone or acrylic) or with the EasyFoam fire protection mounting foam B1. Installation in the system floor area and in light partitions or in massive walls of 100 mm or more. The cable box can be filled 100% with cables of all kinds (without any limitation of the cable diameter) and with electric installation empty tubes according to DIN EN 61386 with and without cable installation up to a diameter of 63 mm. In addition, the cable box can be installed as a reserve sheet without the use of calvary seal. At occupancy no distances between cables, cables and empty pipes and empty pipes are necessary. Within the empty tubes there is no additional limitation of the cable types and the cable diameter. The EasyFoam UFK cable box is reusable at any time with full function maintenance. The assembly is carried out according to the attached assembly instructions or ABG Z-19.5- 2517. No processor certification is necessary for the installation.