RFZ050D, BEKA headquarters for 50 radio - detector

BEKA Central for 50 radio - detector

BEKA Central for 50 radio detectors, white. Bidirectional radio fire detection system for the prevention of fire protection for the construction and operation of day-to-day equipment for children, for smaller homes, accommodation facilities, hotels with more than 12 beds up to 60 beds for which no BMZ is required, and for residential facilities for seniors, disabled or other special residential forms. Bidirectional radio transmission is transmitted by two separate radio bands with frequency change in the 434 MHz with 20 frequencies and in the 868 MH range with 4 frequencies. A maximum of 64 automatic or manual devices can be controlled and evaluated in the 8 reporting areas, which are integrated with automatic sensor head identification and Pushbutton in-use procedure (max. 64 devices: 50 detectors, 14 radio inside sirens or 10 repeaters). The centre has the connection for alarm, interference, assembly alarm reset with 3 switching inputs, day / night operation and has 4 relay and OpenCollector switching outputs for external control of further display devices. The central control unit checks the transmission path of the integrated detectors and components within 300 seconds and thus ensures a close transmission path check. At the central endplay, status / interference or alarm message in clear text with location / time in combination with the 3-color display display is signaled as optical and additionally acoustically or transmitted to 8 defined recipients by the optional GSM module RFW066D for SMS or e-mail. The last 1000 events can be seen chronologically. At the start-up, the configuration is done manually at the central end-play or by means of a configuration tool, text inputs and other settings can be transmitted by e-mail, as well as archiving via the USB or RS232interface at the central and after completion of the initial installation, an automatic total check of the entire system is carried out and, by means of a USB interface, by means of a USB-card or by means of an optional GSM module, by means of a transfer / commissioning protocol. In maintenance mode, the results of the maintenance can be transmitted via USB interface, SD card or optional by e-mail and stored separately and transferred as maintenance protocol. access of the customer level via PIN code to display the day / night function or temporary deactivation of reporting areas, as well as for basic customer level settings, resetting of fault and alarm messages, or optionally to forward the maintenance request by e-mail or SMS.The access of the device level is via a PIN code, where the main configuration features of the system can only be configured or changed by the device. In the device level, the day / night setting, code change and other important configuration or setup settings can be made. The emergency power accumulator RFA400D is not included. Approval: DIN EN 54-2, DIN EN 54-4, DIN EN 54-25.