Lumberg Automation Male 3 way M12 to 4 way Free End Sensor Actuator Cable, 2 m

Belden Sensor Actuator Cable, 4A Current Rating, 5.5mm Outer Diameter - RST 5-87/2M

Whizz data between devices with this sensor actuator cable from Belden. It has M12 connectors – one straight male, one right-angled female – to make easy links. Gold-plated bronze contacts carry signals without a hitch, getting automated equipment the information it needs. Don't worry about accidents pulling the plug, as this cable's coupling screw and nut hold on tight through movement. Harsh environments are no problem for the PUR sheath, which shrugs off cuts and abrasion.

Whizz data between devices with this sensor actuator cable from Belden. It has M12 connectors – one straight male, one right-angled female – to make easy links. Gold-plated bronze contacts carry signals without a hitch, getting automated equipment the information it needs. Don't worry about accidents pulling the plug, as this cable's coupling screw and nut hold on tight through movement. Harsh environments are no problem for the PUR sheath, which shrugs off cuts and abrasion.

Features & Benefits

• IP69K rating indicates full protection against dust and hot, pressurised water jets in steam-clean settings• Colour-coded cores for handy conductor identification• Outer diameter of 5.5mm means it can slip into narrow spaces

• IP69K rating indicates full protection against dust and hot, pressurised water jets in steam-clean settings

• Colour-coded cores for handy conductor identification

• Colour-coded cores for handy conductor identification

• Outer diameter of 5.5mm means it can slip into narrow spaces

• Outer diameter of 5.5mm means it can slip into narrow spaces

Applications

• Chemical processing• Fluid management• Manufacturing industry

• Chemical processing

• Fluid management

• Fluid management

• Manufacturing industry

• Manufacturing industry

Do I need any tools to connect this cable?

No, the connectors tighten by hand, so there's no need to reach for the toolbox.

No, the connectors tighten by hand, so there's no need to reach for the toolbox.