جستجوی کالا ...
دسته بندی ها
کاربر سایت شوید
جستجوی کالا ...
جستجوی کالا ...
وضعیت
:
موجود در انبار اروپا - زمان تحویل 4 تا 6 هفته
برند
:
Schneider Electric
تایپ کالا
:
BSH1001T02F2A
کد سازنده
:
BSH1001T02F2A
کد EAN
:
3389118138605
ویژگیها
Load cycle
other
Intra-European Security (IS)
without
Starting torque ratio
0
Execution
Rotary-current synchronous motor
Overload
No
Isolation class according to IEC
other
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام
مشاهده جزییات فنی کالا :
Servomotor, Lexium BSH, 100mm, 3.3Nm, smooth wave IP54, multiturn 128P / U, 2xM23 angled, brake
Servomotor BSH of the series Lexium 32 servo drives. This BSH series of three-phase AC servo motors has a low rotor inertia moment, which allows a high acceleration for dynamic application. Thanks to the winding technology, a higher power density in compact design results. This servo has a nominal permanent standstill point of 3.3 Nm and reaches a peak torque of 9.6 Nm. Its nominal speed is up to 6000 rpm depending on the supply voltage. A voltage-dependent nominal power up to 1630 W. The built-in encoder is performed as a multiturn with 128 periods / turn (128x1024x4096) as a SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled by 90 ° and rotatable. For mounting the engine flange is 100 mm. The drive shaft has a diameter of 19 mm. The end of the wave is smooth and consistent with the protection type IP54. The engine housing corresponds to the protection type IP65. A brake is integrated. For the operation of the synchronous engine, the servo amplifiers of the LXM32 series are recommended. To support your sustainability objectives, detailed information on material content, environmental impact and circular economy will be provided.
شما هم می توانید دیدگاه خود را درباره این کالا ثبت کنید.
دیدگاه خود را ثبت کنید
BSH1001T02F2A, servo engine, Lexium BSH, 100mm, 3.3Nm, smooth wave IP54, multiturn 128P / U, 2xM23 angled, brake
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام
