جستجوی کالا ...
دسته بندی ها
کاربر سایت شوید
جستجوی کالا ...
جستجوی کالا ...
وضعیت
:
موجود در انبار اروپا - زمان تحویل 4 تا 6 هفته
برند
:
Schneider Electric
تایپ کالا
:
BSH1004T12A2A
کد سازنده
:
BSH1004T12A2A
کد EAN
:
3389118199279
ویژگیها
Start-up current ratio
0
Type of protection (IP)
other
Tipp ratio
0
Number of phases
3
Starting torque ratio
0
Load cycle
other
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام
مشاهده جزییات فنی کالا :
Servomotor, Lexium BSH, 100mm, 10Nm, Passspring IP54, Multiturn 128P / U, 2xM23 angled
Servomotor BSH of the series Lexium 32 servo drives. This BSH series of three-phase AC servo motors has a low rotor inertia moment, which allows a high acceleration for dynamic application. Thanks to the winding technology, a higher power density in compact design results. This servo has a nominal permanent level of 10 Nm and reaches a peak torque of 40.5 Nm. Its nominal speed is up to 3600 rpm depending on the supply voltage. There is a voltage-dependent nominal power up to 2.6 kW. The built-in encoder is a multiturn with 128 periods / turn (128x1024x4096) as SinCos Hiperface. The electrical connection is made via connectors 2x M23, angled by 90 ° and rotatable. For mounting the engine flange is 100 mm. The drive shaft has a diameter of 24 mm. The end of the wave is carried out with a fit spring and in accordance with the IP54 protection type. The engine housing corresponds to the protection type IP65. There is no stop brake. For the operation of the synchronous engine, the servo amplifiers of the LXM32 series are recommended. To support your sustainability objectives, detailed information on material content, environmental impact and circular economy will be provided.
شما هم می توانید دیدگاه خود را درباره این کالا ثبت کنید.
دیدگاه خود را ثبت کنید
BSH1004T12A2A, servomotor, Lexium BSH, 100mm, 10Nm, pass spring IP54, multiturn 128P / U, 2xM23 angled
قیمت
:
استعلام
حداقل قابل خرید
:
1 عدد
قابل پرداخت
:
استعلام
